Hydraulic Project Engineering

Hydraulic Project Engineering by BARDAP Hydraulics, one of the most reliable hydraulic engineering contractors and subcontractors in WA. We are capable to implement and provide large scale hydraulic project services to many leading Australian and international companies. We cater for government sector as well as small to medium businesses involved in Mining, Marine, Oil & Gas, Agriculture, Earth-moving, Transport and Aviation industries with their hydraulic specific requirement.

Our Recent Hydraulic Projects

Mobile 100 tonne Chain and Sling Test Facility

Hydraulic System designed to enable onsite testing of rigging equipment, by applying tension using large hydraulic cylinder, with a load cell and control and monitoring panel for operator. BARDAP designed, manufactured, and commissioned system, including operator training.

30kW electric power source
Kawasaki 80cc cc/rev load sense axial piston pump
Operation from local and remote stations

Mineral Sands Mining Hydraulic Drive System

System designed to drive Warman slurry pump and Joest Screening unit, with speed controls and safety cut-outs. BARDAP designed, manufactured, and commissioned (on site) entire drive system, including operator training and printed hand-book for operations and maintenance.

224 kW Cummins diesel power source
Rexroth axial piston primary hydraulic pump 450 LPM, 300 Bar
Rexroth axial piston secondary hydraulic pump, 170 LPM, 205 Bar
175 kW Kawasaki Axial Piston Motor

Port Facility Ship Loader Hydraulic Power Unit

Unit designed to drive Hagglunds motor, with PLC speed control and safety cut-outs. BARDAP designed, manufactured, and commissioned unit on site, including operator training and printed hand-book for operations and maintenance.

110 kW electric power source
HYDAC axial piston primary hydraulic pump 360 LPM, 200 Bar
HYDAC air-hydraulic fluid cooler
Hagglunds Radial Piston Motor 10,000 Nm Torque, 4,400 cc/rev

Mining Dump Truck Buddy Pump

Auxiliary unit for emergency use, enabling brake release and power steering use on stranded haul trucks.
BARDAP designed, manufactured, tested unit
Galvanized frame, incorporating forklift pockets and rated lifting lugs, inbuilt fuel tank, control console, battery & emergency stop
20kW electric start Hatz air-cooled diesel
Parker 23cc/rev Axial Piston Pump

Jacking System for Construction of Matagarup Bridge (Perth Stadium)

Hydraulic Project Engineering and Hydraulic System designed to facilitate placement of bridge sections and tensioning of suspension cables. Matagarup Bridge consists of three spans, each suspended from arches by cables. Each section was craned onto BARDAP Hydraulics designed and manufactured high pressure jacks, connected to Flow Control Manifolds and Electric Hydraulic Power Units. The jacking system enabled the suspension cables to be connected to the respective bridge section, and then lowered with precision control to tension the cables.

BARDAP Hydraulics designed, manufactured, commissioned the system on site, and trained the operators.

16 off 140 tonne jacks
4 off 100 tonne jacks
2 off electric hydraulic power units developing 10, 000 psi, with Remote Control and Steel Roll Cage
2 off Manifold with Flow Regulating Valves – One In – Four Out
6 off Manifold with Flow Regulating Valves – One In – Two Out